Install Operate and Troubleshoot Medium Enterprise Routers
Assessment
ICTNWK507 Install, Operate and
Troubleshoot
Medium Enterprise
Routers
You are required to complete and pass every task
in the assessment in order to be deemed competent.
Assessment Description
Conduct online research and answer following
questions. Ask your trainer for further assistance if required.
Instructions
1. What legislation, workplace health and safety
(WHS), codes, regulations and standards might you need to adhere to when you
prepare to install ICT equipment’s?
2. List at least 2 network design documentation you
will need to review before installing routers?
3. If IP address of 172.30.30.111/22 is to be
assigned to a host, what are the characteristic of that address? (Choose two)
(a) The broadcast address of the subnet is
172.30.31.255 255.255.252.0
(b) This network is not subnetted
(c) The last valid host address in the subnet is
172.30.30.254 255.255.252.0
(d) The network address is 172.30.30.0 255.255.252.0
(e) The last host address in the subnet is
172.30.31.254 255.255.252.0
(a)
192.216.32.39 255.255.255.248
(b)
192.216.32.47 255.255.255.248
(c)
192.216.32.46 255.255.255.240
(d)
192.216.32.46 255.255.255.248
(e)
192.216.32.47 255.255.255.240
5. Immediately after a router completes its boot
sequence, the network administrator wants to check the routers configuration.
From privileged EXEC mode, which of the following commands can the
administrator use for this purpose? (Choose two.)
(a)
Show flash
(b)
Show NVRAM
(c)
Show startup-config
(d)
Show running-config
(e)
Show version
6.
What are two functions of a router? (Choose
two.)
(a)
It connects multiple IP networks
(b) It controls the flow of data via the use of
Layer 2 addresses
(c)
It determines the best path to send packets
(d)
It manages the VLAN database
(e)
It increases the size of the broadcast domain
7.
Explain the basic routing concepts for small
enterprise network switches and routers.
8.
Outline the following classless routing
protocols, including:
a)
Enhanced interior gateway routing protocol
(EIGRP)
b)
Open shortest path first (OSPF)
c)
Routing information protocol (RIPv2)
9.
Summarise debug commands.
10. Explain internet protocol version 4 (IPv4).Summarise the purpose, and basic operation, of
protocols in the open system interconnection (OSI) and transmission control
protocol, or internet protocol (TCP/IP), models.
11. Explain the router calling line identification
(CLI) configuration
Assessment Description
Review the instructions and diagram below and
configure enterprise router with required configuration.
This is a practical task. Your assessor will
observe your ability to undertake following tasks in a simulated environment.
Ask your trainer for further guidance on your assessment task, submission
procedure and timeline.
Instructions
Your assessor will also ensure that you have
access to each of the following for your assessment:
·
A site where network installation may be
conducted
·
Enterprise routers and operating systems
·
Hardware and software
·
The organisational guidelines (will be provided
by trainer)
·
Computers
·
Diagram
·
IP addressing (will be provided by Trainer)
Diagram:
During
your assessment, based on the given network design diagram, you will need to:
·
Plan and prepare for the installation of a
medium enterprise router.
·
Design a classless internet protocol (IP)
addressing scheme, to suit requirements.
· Install, configure and test the network
elements, to ensure interoperability within the network.
·
Apply network topologies, routing and security
protocols.
·
Apply solutions and troubleshoot any defined
network problems.
Based
on the above and additional information that may be provided by your assessor,
complete the following tasks:
1. List and briefly describe legislation, work
health and safety (WHS), codes, regulations and standards you need to consider
for undertaking your required practical task.
2.
Arrange access to the site as per organisation
procedure.
3. Review existing network design documentation
provided by your assessor. Make changes if documents is not current and/or
complete.
4.
Select and document network elements that are
needed to be installed.
5. Send email to contact vendors and service
suppliers to obtain the specifications and determine the availability of the
identified components. Also, give a follow-up call to your vendor/ supplier (your assessor) to confirm
your inquiry. Write summary of discussion.
6. Develop plans for the installation of components
including tasks priority and contingency arrangements to minimise disruption to
the client.
7. Discuss with your manager (your assessor) and
obtain approval for the plans including security and timing. Provide evidence
of your approval.
8. Determine the basic routing requirements.
Discuss it with your assessor and write summary.
9. Determine the router operating parameters.
Discuss it with your assessor and write summary.
10. List and
describe the appropriate media, cables, ports, and connectors to connect
routers to other network devices and hosts.
11.
Access and use the router to set basic
parameters.
12.
Upgrade the firmware on a router.
13.
Save and backup the router configuration files.
14.
Implement basic router security.
15.
Configure the static and default routes.
16.
Determine,
calculate and apply the appropriate classless addressing scheme in the given
network design diagram.
a)
Describe how you have used variable length
subnet masking (VLSM)
b) Describe summarization to satisfy addressing
requirements in a local area network (LAN) or a wide area network (WAN)
environment.
17. Configure and verify, the classless routing
protocols.
18. Troubleshoot
the device configuration and network connectivity associated with IP addressing
and host configurations using basic utilities.
19. Describe the basic troubleshooting principles
used to verify the network’s operation.
20. Write a
reflection journal outlining what you have learnt while doing all the above
activities.
To get solution visit our website www.sourceessay.com
To get solution visit our website www.sourceessay.com
Comments
Post a Comment